By Two-component silicone potting compound
Two-component silicone potting compound can be divided into condensation type and addition type.
The general characteristics of the condensation type silicone encapsulant: insulation, moisture resistance, excellent electrical properties, excellent heat and cold resistance, weather resistance, etc. Cures at room temperature without exothermic or endothermic. During the curing process, a small amount of low molecular weight (alcohol) is released.
Shanghai Beginor Besil 8125 condensation type silicone encapsulants have the following characteristics:
Besil 8125 A/B 10:1 condensation de-alcohol type low viscosity silicone potting material
Application: Automotive electronics, modules, Power control module, Solar module junction box, LED spotlights, wall washer, bar lights, LED lamps
The product characteristics of the addition type silicone encapsulant: insulation, moisture resistance, excellent electrical properties, excellent heat and cold resistance, and earthquake resistance. Curing at room temperature, or heat curing. No low molecular release during curing. When curing, the inside and outside are cured at the same time, which can be deeply cured.
Shanghai Beginor Besil 8230 addition type Silicon Potting compound has the following characteristics:
Besil 8230 A/B 1:1 low VISCOSITY high Performance & Thermal Conductivity Flame retardant silicone material
Application: encapsulation of amplifiers, automotive electronic units, ballast, bleed resistors, connectors, flyback transformers, high voltage resistor packs, lifting magnets, power controllers, power supplies, radio frequency induction transformers and sensing
useful!