Home > Product > Potting Material >Silicone Material > BeSil 9336

Besil 9336 series one part heat-resistant silicone sealant

Deacetone type, one-part, moisture-cure RTV silicones.

Physical Form

  • Cure fast and cure to flexible elastomers

Special Properties

  • Room-temperature; resist humidity and other harsh environments;
  • high temperature resistant, good dielectric properties; self-priming adhesion;

Features

Besil 9336 Series sealant are neutral silicone adhesive. This silicone rubber can withstand high temperature to 300 ℃ and maintain its good elasticity for short time. Compared with deoxime type and dealcohol type, the deacetone type release off very few low molecules and VOC in closed space when curing, even under high temperature.

Data Sheet

◼ TYPICAL UNCURED PROPERTIES
Besil 9336
Appearance White or Black, Paste
Viscosity（mPa.s）, GB/T 10247-2008 600,000 ± 100,000
Specific Gravity（g/cm3）, GB/T 15223-1994 1.21±0.05
25 Tack-free Time(min), GB/T13477-2002 5±2
◼ TYPICAL CURED PROPERTIES (CURED 7 DAYS @ 25℃/55％RH)
Tensile strength (Mpa), GB/T 528-2009 2.0±0.3
Elongation(%), GB/T 528-2009 150
Hardness(shore A), GB/T 531-2008 40± 5
Adhesive strength (Mpa), GB/T 7124-2008 2.5±0.3
◼ ELECTRICAL PROPERTIES (CURED 7 DAYS @ 25℃/55％RH)
Dielectric strength (kv/mm), GB/T 1695-2005 20
Dielectric constant (@1MHz), GB/T 1693-2007 2.9
Dielectric loss (@1MHz), GB/T 1693-2007 0.09
Volume resistivity (Ω·cm), GB/T 1692-92 2×1014
Thermal conductivity [W/(m·K)], GB/T 10297-1998 0.50

Application

  • Electricity
  • LED lighting
  • Solar
  • Equipment
  • Filters
  • House-hold
  • Semi-conductor kitchen appliance
  • Power supplies microwave ovens
  • Irons, high temperature oven

How to use

If packaged as drums,such as Besil 9336-1

1st. Open the Barrelhead, take off the foam pad and film sheet, clean the surface upside,

2nd. Fix bucket to the pump, exhaust to avoid bubbles,

3rd. Run the robot according to a certain track, 4th. Place the finished product on a platform.

5th. After cured 6-8 hours at 25 ℃ and 55% RH, the product

can enter the next assembly process.

If packaged as cartridges,such as Besil 9336-5.

1st. cut off the thread, screw on a plastic nozzle. The inside diameter of nozzle should be cut probably about 3mm.

2nd. Fix the tube to a gun, exhaust to avoid bubbles, 3rd. Fix glass to thr frame by silicone adhesive.

4th. Place the finished product on a platform.

5th. After cured 6-8 hours at 25 ℃and 55% RH, the product can enter the next assembly process.

TDS Download

[auth-download url=”https://beginor-chemical.com/wp-content/uploads/2019/03/TDS-of-BESIL-9336-Flame-retardant-silicone-adhesive.pdf” title=”TDS Download Besil 9336″]

Get a Quote Now

    Related products

    Besil 9002 fast skin-curing silicones sealant

    Color: Clear

    Besil 9339 semi-flowable one part silicone sealant

    Color: White

    Besil 9333 Semi-flowable RTV silicone sealant

    Color: White

    Besil 9102 good adhesion rtv silicone sealant

    Color: Clear