Certification
ISO9001 ISO14001 IATF16949ROHS UL REACH FDA
Home > Product > Potting Material >Silicone Material > BeSil 9336
Besil 9336 series one part heat-resistant silicone sealant
Deacetone type, one-part, moisture-cure RTV silicones.
Physical Form
- Cure fast and cure to flexible elastomers
Special Properties
- Room-temperature; resist humidity and other harsh environments;
- high temperature resistant, good dielectric properties; self-priming adhesion;
Besil 9336 Series sealant are neutral silicone adhesive. This silicone rubber can withstand high temperature to 300 ℃ and maintain its good elasticity for short time. Compared with deoxime type and dealcohol type, the deacetone type release off very few low molecules and VOC in closed space when curing, even under high temperature.
| ◼ TYPICAL UNCURED PROPERTIES | |
| Besil 9336 | |
| Appearance | White or Black, Paste |
| Viscosity（mPa.s）, GB/T 10247-2008 | 600,000 ± 100,000 |
| Specific Gravity（g/cm3）, GB/T 15223-1994 | 1.21±0.05 |
| 25 Tack-free Time(min), GB/T13477-2002 | 5±2 |
| ◼ TYPICAL CURED PROPERTIES (CURED 7 DAYS @ 25℃/55％RH) | |
| Tensile strength (Mpa), GB/T 528-2009 | 2.0±0.3 |
| Elongation(%), GB/T 528-2009 | 150 |
| Hardness(shore A), GB/T 531-2008 | 40± 5 |
| Adhesive strength (Mpa), GB/T 7124-2008 | 2.5±0.3 |
| ◼ ELECTRICAL PROPERTIES (CURED 7 DAYS @ 25℃/55％RH) | |
| Dielectric strength (kv/mm), GB/T 1695-2005 | 20 |
| Dielectric constant (@1MHz), GB/T 1693-2007 | 2.9 |
| Dielectric loss (@1MHz), GB/T 1693-2007 | 0.09 |
| Volume resistivity (Ω·cm), GB/T 1692-92 | 2×1014 |
| Thermal conductivity [W/(m·K)], GB/T 10297-1998 | 0.50 |
- Electricity
- LED lighting
- Solar
- Equipment
- Filters
- House-hold
- Semi-conductor kitchen appliance
- Power supplies microwave ovens
- Irons, high temperature oven
If packaged as drums,such as Besil 9336-1
1st. Open the Barrelhead, take off the foam pad and film sheet, clean the surface upside,
2nd. Fix bucket to the pump, exhaust to avoid bubbles,
3rd. Run the robot according to a certain track, 4th. Place the finished product on a platform.
5th. After cured 6-8 hours at 25 ℃ and 55% RH, the product
can enter the next assembly process.
If packaged as cartridges,such as Besil 9336-5.
1st. cut off the thread, screw on a plastic nozzle. The inside diameter of nozzle should be cut probably about 3mm.
2nd. Fix the tube to a gun, exhaust to avoid bubbles, 3rd. Fix glass to thr frame by silicone adhesive.
4th. Place the finished product on a platform.
5th. After cured 6-8 hours at 25 ℃and 55% RH, the product can enter the next assembly process.
[auth-download url=”https://beginor-chemical.com/wp-content/uploads/2019/03/TDS-of-BESIL-9336-Flame-retardant-silicone-adhesive.pdf” title=”TDS Download Besil 9336″]
Related products
Color: Clear
Color: White
Color: Clear