Certification
ISO9001 ISO14001 IATF16949ROHS UL REACH FDA
Home > Product > Conformal Coating > Besil 9002
BESIL 9002 one-component flowable transparent silicones adhesive
- Room-temperature curing;
- Resist humidity and other harsh environments;
- good dielectric properties;
- self-priming adhesion;
- low viscosity, flowable;
- High transparency and high physical and mechanical properties
- BESIL 9002 one-component flowable transparent silicones adhesive, non-corrosive silicone adhesive sealant that cures on exposure bymoisture to form an elastic silicone rubber.
- In between -60-260 ℃ stable mechanical and electrical properties
- Excellent outdoor aging, the service life of up to 20-30 years
| Items | Method | Unit | Value |
| Before cured | |||
| Color | Visual inspection | — | transparent |
| Viscosity(cp) | GB/T 2794-2013 | 25℃, mPa·s | 30,000 ± 10,000 |
| Specific Gravity | GB/T 15223-1994 | 25℃, g/cm3 | 1.02±0.02 |
| Tack-free | GB/T13477.5-2002 | 25℃, 55%RH,min | 20 |
| After cured | |||
| Hardness | GB/T 531-2008 | Shore A | 28 ± 3 |
- LED lamps sealed
- Plastic metal shell sealing
- PCB board components
- Wiring harness fixed
- Electronic
USE
Apply a bead of Besil 9002 Adhesive/Sealant (see Handling Precautions) to one of the prepared surfaces, then quickly cover with the other substrate to be bonded.
On exposure to moisture, the freshly applied material will “skin-over” in about 3-5 minutes at room temperature and 50% relative humidity. Any tooling should be completed before this skin forms. The surface is easily tooled with a spatula. The adhesive/sealant will be tack-free in approximately 10 minutes.
[auth-download url=”https://beginor-chemical.com/wp-content/uploads/2019/03/TDS-of-BESIL-9002-silicone-adhesive.pdf” title=”TDS Download Besil 9002″]
Related products
Color: Clear
Color: White