Beep 6211 Two Part High Strength Epoxy Structural Adhesive

Home > Product > Sealant&Adhesive > Epoxy Material > Beep 6211

Beep 6211 two part epoxy structural adhesive

Resistance of moisture, pollution and other atmospheric constituent
High tensile, excellent adhesive property
Excellent pollution resistance, low demand of surface pretreatment
No solvent, no curing by-products
Excellent high and low temperature resistance (-50~150°C)
Medium viscosity, good operational process
Good adhesion to fiberglass cloth, steel plate etc

Features

FEATURES

Beep 6211 is a room temperature curing or heat curing epoxy structural adhesive. It has following properties after cured with mixture ratio 1:1 of weight

Data Sheet

PROPERTY	STANDARD/UNITS	VALUE of Beep 6211
—-	—-	PART A	PART B
Appearance	Visual inspection	Black viscous paste	Beige viscous paste
Viscosity	25°C, cps	80,000	55,000
Density	25°C, g/cm3	1.35	1.35
Mixture ratio	Mass ratio	A:B=1:1
Viscosity of mixture	25°C, cps	Thixotropic paste
Mixture density	25°C, g/cm3	1.35
Operation time	25°C, min	10 (tested based on 100g mixture)
Cure condition	RTV/HEAT	25°C/ 70 min; 60°C/ 20 min
Hardness	Shore D	90
Shear strength	Al/Al, MPa	17
Thermal conductivity	W/mK	0.4

For bonding of Metal, SMC glass fiber reinforced plastic parts, Aluminum honeycomb panel, Motor iron core, Nomex paper bonding, high-speed rail track repairing, metal and plastic of rail transportation, metal and composite material bonding etc.

How to use

USE

1. Stir part A and part B separately in the origin container before taking to mix, keep sealed after taking.
2. Mixing and stirring the mixture at same direction, or there will be too many air inside the adhesive;The adhesive at the frame and bottom of container should be stirred well, or there will lead to somewhere uncured.
3. The temperature is too low will lead to low curing speed, heat cure is recommended. When unable to achieve an initial strength, constant temperature control is required on site.
4. The curing process is an exothermic reaction; the amount of adhesive impact the operation time. Above operation time of 100g is just for reference.