Beep 6206 Transparent two-component epoxy structural adhesive

Home > Product > Potting Material > Epoxy Material > Beep 6206

Beep 6206 Transparent two-component epoxy structural adhesive

Excellent adhesion and cracking resistance
Excellent electrical insulation and stability
Very low water absorption, good waterproof, moisture-proof

Features

FEATURES

BEEP 6206 A/B series are two-component solventless epoxy structural adhesives with low viscosity, high hardness, excellent chemical resistance and mechanical properties.

Data Sheet

Before curing	Item	Test method	Unit	BEEP 6206 A	BEEP 6206 B
	Color	Visual	—	transparent liquid	Light yellow transparent liquid
	Viscosity	GB/T 10247-2008	25℃，mPa·s	5,000±800	60±10
	density	GB/T 13354-92	25℃，g/cm³	1.14±0.05	1.00±0.05
	Mixing ratio	Mass ratio	Ratio=A:B	5 : 2
	Mixed viscosity	GB/T 10247-2008	25℃，mPa·s	600±100
	Operating time	GB/T 10247-2008	25℃，min/120g	25
	Initial curing time	GB/T 10247-2008	25℃，min/120g	120

Application

Widely used in automotive electronics, pressure sensors, connecting harnesses, motor magnetic sheet bonding.

How to use

USE

Matching glue: The components A and B are weighed and weighed according to the weight ratio of 5:2. After mixing, the potting can be carried out.
The operation time of this product is short. If the amount of glue is large, it is recommended to take multiple mixing.
The potted device can continue to be vacuumed if necessary, which is beneficial to increase the electrical performance of the device.
Curing conditions: 80 ° C / 2 h or 25 ° C / 24 h hours. If you need to use glue filling equipment, please consult our marketing department.

TDS Download

[auth-download url=”https://beginor-chemical.com/wp-content/uploads/2019/03/TDS-of-BEEP-6206-epoxy-structural-adhesive.pdf” title=”TDS Download Beep 6206″]